Dry Heat Sterilizer

LTS Sterilizer

a) The temperature setting on the automatic controller will not generally be the sterilization temperature, but a higher temperature within the sterilization temperature band

b) For EO, the maximum allowable temperature will normally be 4 DegC above the sterilization temperature/

c) For LTSF, the sterilization conditions may specify either a continuous holding time or the number of pulses of formaldehyde required to chieve sterilization.

d) Fo EO, the gas exposure tie is determinated for each sterilizer by microbiological methods during commissioning but is tyically 2-7 h depending upon sterilization temperature and gas concentration.