The standard test pack wrap is used in conjunction with cotton test towels (SEN-1019) to create a standard test pack as described in HTM 2010.

SEN-1020

The Standard Test Pack Wrap is for use with the HTM2010 Standard Test Pack.

HTM 2010 requires that before use, the Standard Test Pack be compressed by hand, wrapped in a similar fabric and secured with tape that is no more than 25 mm wide.

To a sterilizer test person, it's a simple but fiddly operation that has to be carried out frequently. When a rectangular cotton sheet is used to wrap the pack, the folding on the sides and top become bunched and using autoclave tape to tie the pack is messy and awkward, and to simply move the pack after airing and folding requires the use of both hands. The Standard Test Pack Wrap makes the whole procedure simple and easy to use.

The Standard Test Pack Wrap is made in the shape of a St George's Cross so that bunching at the sides and top is eliminated. Ties and loops alleviate the need to use autoclave or masking tape to hold the pack together. It allows an even compression of the pack. A handle allows the pack to be moved easily when transporting or placing in a sterilization chamber. Eyes are fitted at the top of the wrap to attach the free space temperature thermocouple aerial firmly in the correct position using a 50 mm height guide when performing small load thermometric tests. The Standard Test Pack Wrap is made from 100% pre-washed cotton. The material is manufactured to be same specification as that of the sheets used to make up the Standard Test Pack.