Comments for Isopharm Sentry Limited

Comment on Need Remote Support by John walker

John walker — Wed, 18 Jan 2012 13:12:00 +0000

Working in Uganda on a dental mission atMildmay AIDS clinic in Kampala. We are today in the middle of treating a schedule of 72 children and the sterilizer has locked up. Sympton is that the door is locked and the display reads-ELECT. Tried unplugging but does not reset the unit. Any help to get this working again would be very much appreciated as it effecting our schedule and we have many more days to go. john Walker

Comment on Definition of Benchtop Sterilizer Types by vicky grimley

vicky grimley — Wed, 31 Aug 2011 15:12:00 +0000

is it vital we use a vacuum autoclave to comply with best practice?

Comment on How to Test Your Washer Disinfector by Airi Mackinnon

Airi Mackinnon — Mon, 25 Jul 2011 12:41:00 +0000

Do you do the annual tests for a medisafe Washer disinfectors

Comment on Pressure Error Adjustment by Denis

Denis — Mon, 25 Jul 2011 08:45:00 +0000

I have a problem with pressure calibration. I do low, high and checkpoint and every time the checkpoint is out by 300 +- Mbar.
At atmospheric and at mid range. When I check low point again it reads ok and high point is also ok. We did a process of elimination and substituted the logger, the transducer and power suopply and finally found it to be the TQ soft. What can I do with this? I ran 18 -20 calibratioons and always the same error.

Comment on BP5 HTM01-05 Welsh Edition to be Published by Paul Ward ISL

Paul Ward ISL — Thu, 16 Jun 2011 14:05:00 +0000

Hi Nicola, the Welsh edition has only had the go ahead to be created and is yet to be published. Further information can be found at:

http://wales.gov.uk/publications/accessinfo/drnewhomepage/healthdrs/2011/4877106/;jsessionid=QNkVNFVNDLQLPgwrbpyM204Xtmjj12FWX12VH8W8N191hGw0B2js!1531853584?lang=en

We are currently unaware of a publication date for the document however we will continue to provide further updates within our Best Practice newsletter.

Comment on BP5 HTM01-05 Welsh Edition to be Published by Nicola Beach

Nicola Beach — Thu, 16 Jun 2011 13:35:00 +0000

Where can we obtain a copy of this document please?

Comment on Manufacturer HTM01-05 Guidelines by MLA

MLA — Sun, 12 Jun 2011 15:12:00 +0000

I wonder if hand pieces MUST go in a vacuum autoclave?

Comment on Manufacturer HTM01-05 Guidelines by Raouf

Raouf — Sun, 12 Jun 2011 14:22:00 +0000

in My practice we are working hard towards best practice procedure the only thing we haven`t done it yet is hand pieces in dishwasher ( we did it for a week but after 1 week 8 of hand pieces needed repair so we now clean our handpieces with hand wash as manufactory recomended us then in vacum autoclave with pouchers. are we doing anything wrong or we are allowed to do that ?

Comment on Support by Apexmedical

Apexmedical — Mon, 09 May 2011 20:55:00 +0000

Thanks for the Securilog updates, and great video tutorials.

many thanks

Apex Medical Engineering

Comment on Data logger Setup by Apexmedical

Apexmedical — Thu, 28 Apr 2011 21:15:00 +0000

Great software updates and excellent tutorials. Many thanks,

Apex Medical Ltd