logincartsite mapcontacttechnical forum
 
Site Mailing List
Register with this site to receive email notifications, updates and new site information. Enter your email address and press the submit button.

Email Address:
*
Verify image below:
*
 What is Bowie Dick Testing? 

Sterilization is achieved by the rapid and even penetration of steam into all parts of the load and the maintenance of these conditions for the specified holding time. To ensure this, it is essential to remove air from the chamber and load, and to provide a steam supply which contains a minimal volume of noncondensable gases. Any residual air and non-condensable gases will become concentrated as a bubble in the load and inhibit steam penetration.

The Bowie-Dick test shows whether or not steam penetration of the test pack is even and rapid, and thus by implication that air or other noncondensable gases are not present. It does not confirm that the sterilization conditions in the load have been achieved.

 Bowie Dick Tests 
Sterilizer Validation | Bowie Dick Test
Bowie Dick TST Single Use Test Pack
Price:
£63.35 ex. VAT
£74.44 inc. VAT

Daily steam penetration tests for large porous load sterilizers.

Incorporating TST Control Technology. Independently validated tests conforming to the highest standard.

  • Presents an independent monitoring test to validate the steam penetration of your process.
  • Specially formulated from reactive ink to provide early warning of a possible malfunction.
  • Pre-assembled alternative to test towels and ready for use straight from the box.
Browne Bowie Dick Test Sheets A4
Price:
£35.00 ex. VAT
£41.12 inc. VAT
  • A4 Size
  • 50 Sheets per folder
  • Conforms to
    • EN867 - 3 Class B (6)
    • ISO 11140 - 1 Class 2 (2)
  • Calibrated for use in the standard towel pack specified in EN285 : 1997 (7) and in HTM 2010 (8)
Standard Test Pack Towels 900mm x 1200mm
Price:
£118.00 ex. VAT
£138.65 inc. VAT

Test towels for small load thermometric tests and Bowie Dick tests.

Conforming to HTM 2010(8) and EN285:1997(7)

Size 900mm x 1200mm Pack of 40 Sheets.
Standard Test Pack Wrap
Price:
£36.00 ex. VAT
£42.30 inc. VAT

The standard test pack wrap is used in conjunction with cotton test towels (SEN-1019) to create a standard test pack as described in HTM 2010.
Standard Test Pack Carrier
Price:
£35.00 ex. VAT
£41.12 inc. VAT

The Standard Test Pack Carrier provides protection for the Standard Test Pack when in storage or transit. It protects against dirt and helps maintain the correct humidity.

Standard Test Pack Towels Airing Rack
Price:
£35.00 ex. VAT
£41.12 inc. VAT
Allows test sheets to be properly aired as stated in HTM 2010, failure to properly air test towels can result in misleading results.
Eschmann Spare Parts 
ISL is an ISO 9001:2000 Registered Company

Isopharm Sentry Limited | The Validation Centre | Thornbury Hill Lane | Near Firbeck | Rotherham | S81 8JW | United Kingdom
Tel +44 (0) 1709 811460 | Fax +44 (0) 01709 811461 (Sales) | Fax +44 (0) 01709 811462 (Accounts)

sales@isopharm-sentry.com | www.isopharm-sentry.com

VAT Number: GB737 943 78 | Registered in England and Wales 3843619 | ISO9001:2000 Registered Company LRQA 4001093

Office Hours Mon-Fri 9am to 5pm (GMT)

Online shop open 24 Hours a day 365 days per year
Site Powered By
    WebKeeper WebSite Builder
    Online web site design